::::::::: MAHASHAKTHI ENGINEERING & AUTOMATION CO. .............

ROLLING SHUTTERS

	Rolling shutters are made in M.S CR SHEET /SS STAINLESS STEEL. G.I -GALVANIZED MATERIAL ,ALUMINIUM & POLYCARBONATE

	MAHASHAKTHI’S” PULL & PUSH TYPE ROLLING SHUTTERS made out of 18 gauge C.R. sheet of convex corrugation complete with pressed side guides & pressed bottom rails manufactured as per IS Specification with interlocking arrangement for steel lath brackets, extra door suspension, Shaft made out of new pipes ,loaded with high tension springs, Locking arrangements ,[Hasps] pulling hooks handles with all a fitting accessories with best work man ship and the entire shutter painted with a coat of red-oxide factory finish with erection .with out Top Cover.

	MAHASHAKTHI’S MECHANICAL GEAR TYPE ROLLING SHUTTERS manually operated by winding handle made out of 18 gauge C.R. sheet of convex corrugation complete with Built up 75mm x 25mm / pressed side guides & Bottom Rails manufactured as per ISI Specification Patty drum Shaft loaded with high tension springs, with quality & reliable Gear set ; locking arrangements [Hasps] handle painted with a coat of factory red-oxide finish in best work man ship. With out Top Cover.

	MAHASHAKTHI’S MECHANICAL GEAR TYPE ROLLING SHUTTERS manually operated by winding handle made out of 18 gauge C.R. sheet of convex corrugation complete with Built up 75mm x 25mm / pressed side guides & Bottom Rails manufactured as per ISI Specification Patty drum Shaft loaded with high tension springs, with quality & reliable Gear set ; locking arrangements [Hasps] handle painted with a coat of factory red-oxide finish in best work man ship. With out Top Cover.

	MAHASHAKTHI’S QUALITY COLLAPSIBLE GATE with single or double leaves made out of 20mm Branded Gate Channels having lattice bars of flats of 20mm x 5mm throughout the height the length and height of the gate fitted with cast iron rollers ;handles on both sides & locking device ,openings with 100 mm with a coat of red-oxide factory finish ,complete with all fitting accessories with erection.

	MAHASHAKTHI’S” PULL & PUSH TYPE PERFORATED ROLLING SHUTTERS made out of high quality 18 gauge C.R. sheet of convex corrugation 3mm /4 mm uniform holes in center available in corrugation & flat.

	MAHASHAKTHI’S” PULL & PUSH TYPE ROLLING SHUTTERS made out of 1mm ALUMINUM DOUBLE SIDE SHUTTER LATH complete with pressed 50mm side guides & pressed bottom rails of ISI SPECIFICATION

Wide range of models of motors for rolling shutters weighing from 150 kg to 2000 kg from Italian leader – GAPOSA

Can be installed on both new and existing shutters. Motor concealed inside the hood. No bulky fittings visible outside. Simple and easy to install.

Provision of manual override incase of power failure. Motor protected by internal thermal switch. Comfortable operation with radio control.

Rolling shutters made from Stainless Steel / Aluminium [single wall – double wall – extruded(non insulated) , roll form (insulated) / P.V.C. / Galvanised Steel (IS-6248).

Corrosion-free surface of aluminium roller shutter profile is additionally coated by a high-quality thick layer stove enamel.

Higher stability of profile and better optical characteristic.

Optimum for constructions-buildings that are daily exposed to weather.

ROLL FORMING MACHINES